Go Back   Land Rover Forum > Land Rover Tech > Tech Info
Register Garage All Albums FAQ Community Calendar Today's Posts Search

Tech Info Discuss general tech info here, from tech write ups and how-to's.


Reply
 
Thread Tools Display Modes
Old 03-29-2011, 05:16 PM   #1
Joey
Senior Member
 
Join Date: Mar 2011
Location: Liberty Twp, OH
Posts: 225
Garage
Default What's the largest tire I can fit on the Discovery?

I know I got this from Discoweb:

A lot depends on how much sheetmetal you are willing to cut.
Tire fitment guide:
• 235/70-16: Stock Discovery tire size.
• 205/80-16: Stock size in many other countries. same height as 235/70-16.
• 255/65-16: same height as stock
• 225/75-16: little taller than stock
• 245/70-16: little taller and wider than the stock size. reportedly, no need for lift or trimming to fit those tires.
• 245/75-16: most popular size for OME suspension lifted vehicles. require slight trimming on the rear wheel well fender, and may also call for adjustment on the steering bumpstops.
• 215/85-16: same height as 245/75-16. but narrower. seems to be preferred for the snow and mud.
• 265/70-16: about as tall as 245/75-16, but wider. will require more trimming and steering bump stops adjustments along with taller bump stops over the rear axle.
• 265/75-16: almost 32" tall. Same as stock NAS D90 tires. Will require even more trimming.
• 235/85-16: same height as 265/75-16 but narrower.
• 255/85-16: about 33" tall...very few people have fitted this size. Lots of butchering for this one, including rear doors.
• 285/75-16: about 33" also... but very very wide.
Seems that the "sane" limit is at 33 inchers. But, you can go taller, along with body lifts and more butchering.
__________________
This forum is not used much... please go to:

http://www.landroverworld.org


Joey
Cincinnati OH
http://www.customroveraccessories.com Home of the New D2 horn buttons!

http://www.usarovers.com/ (call for Rover parts ask for Nathan 502-222-5859)

Rover Radio issues or IPOD Adapters http://home.valornet.com/splacket/index.htm

EAS fault http://www.rswsolutions.com

When working with GEMS vehicles. Never try to locate a misfire by pulling plug leads off - pull the injector connector instead. Otherwise you can blow up the ECU.

Secondly never swap ECUs between vehicles to test them, because both vehicles and ECUs may stop working, and you'll have to have them all reset by a franchised LR dealer (ouch!).
Joey is offline   Reply With Quote
Old 04-11-2022, 03:48 PM   #2
bekzclz11
Junior Member
 
Join Date: Apr 2022
Posts: 2
Default



Most trucks can accommodate a 33” tire without a lift kit. Trimming of fender liners and wheel arches combined with adjustments to torsion keys might be necessary on most IFS (Independent Front Suspension) trucks. Fitting wheel spacers and 2” leveling kits will improve the clearance from the UCA (Upper Control Arms).


krnt.run
myindigocard app

Last edited by bekzclz11; 06-21-2022 at 11:45 AM.
bekzclz11 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:14 AM.


Sponsor Ads

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

Garage vBulletin Plugins by Drive Thru Online, Inc.